I just realised that a whole bunch of different stuff stockpiled on my harddrive. Some of it is quite old, some rather new, all of it is unfinished or just outlines.
I'ld like to finish these one days, but I've no idea if or when I'll do so for some of these, so I decided to just post them like they're now.
If anyone might be interested in some outlines, just ask for them
They're ordered chronologically based on when I started with the image: The first one is the first one I started with, the last one is the most recent project. Fortunatelly I could perfectly combine it with ordering it after manga, as the order of me reading manga and doing colourisations is quite parallel
Berserk (6) and one from Hellsing
Vinland Saga (2)
Tegami Bachi - Gauche Suede and Roda (Outlines)
Last edited by Roflkopt3r; December 12, 2010 at 02:49 PM.
You're going down the right path, keep it up, you will improve.
the astronaut looks sick. your not going to colourate him?
It's a panel like I didn't work on before, basically it has almost only white colours so it won't take many different layers, I guess it should be "relatively" simpel for most parts.
First of all I'll work on a page from Wolfen Crest though
I tryed to improve the outlines a little on this one, using size Jitter for a slightly different style - I figured it would suit the original ink style and the general "wild" style of Wolfen Crest - and an absurd file size (somewhat around 3000*4000) to be able to use pen sizes from three to six without having too massive outlines.
I used the same things on the second shot of Fee.
Well, I guess outlines aren't the problems, it just often bores me after a while of colours. However, I'm having progress on some shots, the Gauche Suede one draws closer to be finished for example as I at least reached to the soft shading now.
Last edited by Roflkopt3r; December 21, 2010 at 06:27 PM.
great colorisation, but
u need to work on u r colors, you have to take colors from the anime or manga,
and dont use blure eff,
and good luck dud
I don't use blur effect either. I guess you mean the soft shadings on some shots. I don't like only using a single simple shade. I rather aim for results like these:
Last edited by Roflkopt3r; December 22, 2010 at 07:27 AM.
then try to work with pen tool, dnt use brushes
just pen tool, soo .. if u work on somthing never been colored, use ur imagenation to pic a good colors,
and dnt frgt, prcts make prfctn... simple colo is better
visit me http://yuma-adn.deviantart.com/
I just drew those outlines using Pen Tool with activating Simulate Pressure when drawing those paths. In Shape Dynamics I used Size Jitter with around 40% iirc. Other options which can be used are those of "Scattering".
Other than that, I changed my method for it a little. I used to first draw all paths using pen tool and then draw everything at once. But for this one, I drew every single sub path right after I adjusted it to the outlines.
Also, I used a very very huge file size of approx 4000x3000 iirc, so I could use a large variety of brush sizes (around 5-6 for thick and 3-4 for thinner lines).
I think it's also necessary to have such huge sizes for Jitter/Scattering to look decent.
And I finally started caring for the right use of simulate pressure. It seems the only viable option without using a tablet is, that it's thick in the middle and becomes smaller to the outsides, so for hair it's good if the "middle" is actually the upper part, so the outlines become thinner when reaching the thin end of the hair. I usually do that by not connecting the paths at the lower end of the hair, but in at the upper end instead, which looks like this then:
Last edited by Roflkopt3r; December 26, 2010 at 12:10 PM.
I just use ordinary scans and increase the image size until it's so big, naturally the outlines will suit any resolution after being redrawn with pen tool.